Central AsianResearch Index

ОСОБЕННОСТИ СЕЛЕКТИВНОЙ ТВЕРДОФАЗНОЙ МЕТАЛЛИЗАЦИИ ОКАТЫШЕЙ И БРИКЕТОВ ЭКСТРУЗИИ (БРЭКСОВ) ИЗ ООЛИТОВОЙ ЖЕЛЕЗНОЙ РУДЫ

СУЛЕЙМЕН Б.Т., КОСДАУЛЕТОВ Н.Ы., АДИЛОВ Г.А., SULEIMЕN B.T., KOSDAULETOV N.Y, ADILOV G.A., СУЛЕЙМЕН Б.Т., КОСДАУЛЕТОВ Н.Ы., АДИЛОВ Г.А.

In this paper, an experimental study of the process of solid-phase selective metallization of pellets and extrusion briquettes (braces) from the oolitic iron ore of the Ayatskoye deposit is carried out. The research included the development of a laboratory technique for the production of initial samples – crushing ore, forming wet braces and pellets, drying and firing them in an oxidizing atmosphere to remove moisture and partially remove sulfur. After that, the samples were subjected to reducing firing in an atmosphere of carbon monoxide and in contact with solid carbon at temperatures of 950 and 1050 degrees Celsius for three hours. As a result, it was found that at a temperature of 1050 ° C, the metal phase content in the samples reaches up to 0.6 atm. %, and the phosphorus content in the metal when using solid-phase processing is up to 3.1 atm. %. Analysis of the mass of the samples after recovery showed that the losses in the samples recovered at 1050°C in the presence of solid carbons exceed the losses when using a CO atmosphere. Reducing the reduction temperature to 950 °C has virtually no effect on the difference in mass loss when using a CO atmosphere and when in contact with solid carbon.

Сведения

Опубликовано
2025 · Т. 80, № 2
Язык
Русский
ISSN
2312-475X
Издатель
K. Zhubanov Aktobe Regional University