Solving the problem of stabilizing a given position and programmed motion of an anthropomorphic robotic arm
A three-link anthropomorphic robotic arm moving in a vertical plane with viscous friction in the joints is considered. The problems of stabilizing a prescribed position and tracking a programmed motion are addressed under the assumption that only the joint rotation angles are measured. For position stabilization, a nonlinear PI controller with feedback based on the sines of the half-angle errors is proposed. Using Lyapunov functions, explicit conditions on the gain coefficients and the dissipation coefficient are obtained, under which the prescribed position is stabilized for arbitrary initial deviations. For piecewise-constant discrete control, an estimate of the admissible discretization step is derived. To track the programmed motion, a control law with a dynamic filter that replaces direct velocity measurements is constructed. It is proved that, under the established conditions, the tracking error tends to zero modulo 2π for arbitrary initial conditions. The results are confirmed by numerical simulations.
Сведения
- Опубликовано
- 2026 · Т. 37, № 3, С. 3-10
- Язык
- Английский
- ISSN
- 2010-7250
- Издатель
- Механика ва иншоотлар сейсмик муст аҳ камл иги институти