NNC RK Bulletin2019
THERMAL RESISTANT COATING OBTAINED FROM ZIRCONIUM AND ALUMINUM OXIDES BY DETONATION METHOD
The aim of this work was to study coatings deposited by the detonation method on the surface of stainless steel 12X18H10T. CCDS detonation complex, Xpert Pro X-ray analysis (U = 40 kV, I = 30 mA CuKα), Phenom ProX scanning electron microscope (SEM) and DuraScan-20 microstructure detection methods were used. The surface of the steel was covered by Al 2 O 3 and ZrO 2 powders in 500 and 1100 μm thick. The thickness of the coating was measured and the elemental analysis was performed. Based on literary reviews and research, it was found that the covering of the metal with different coatings increases the physico-mechanical and tribological properties.
Сведения
- Журнал
- NNC RK Bulletin
- Опубликовано
- 2019 · Т. 1, № 4, С. 103-107
- Язык
- Английский
- ISSN
- 1729-7516 · 1729-7885
- Издатель
- Republican State Enterprise "National Nuclear Center of the Republic of Kazakhstan
- Аффилиации
- D. Serikbayev East Kazkahstan state technical university
S. Amanzholov East Kazakhstan state university
Wroclaw polytechnic university