Central AsianResearch Index

<b>ОБОСНОВАНИЕ ПАРАМЕТРОВ ФРЕЗЕРНОГО УСТРОЙСТВА ВЫГРУЗКИ ВЕРТИКАЛЬНОЙ КОМПОСТИРУЮЩЕЙ УСТАНОВКИ ПО КРИТЕРИЮ ЭНЕРГОЕМКОСТИ</b><b></b>

The paper presents the results of theoretical and experimental studies of the mechanized unloading of organic material from a vertical composting unit. One of the main operational problems of such units is the formation of stable material arches in the lower part of the chamber, which prevents uniform discharge of the processed material and increases energy consumption. To destroy these arches, an unloading device equipped with disk milling cutters mounted on rotating shafts was investigated. The aim of the study was to substantiate rational design and operating parameters of the milling unloading device according to the criterion of minimum specific energy consumption while maintaining the required throughput. Experiments were conducted using composting mixtures with a moisture content of 60–65%, including cattle manure mixed with chopped straw and cattle manure mixed with sawdust. The controlled factors were the angular velocity of the milling cutters within 6–18 s⁻¹, the cutter spacing of 0.075–0.155 m, and the knife installation angle of 15–45°. A three-factor Box–Behnken experimental design was used. The results showed that a rational combination of throughput and energy consumption was achieved at a cutter spacing of 0.115 m and a rotational speed of approximately 120 min⁻¹. Under these conditions, the unloading capacity reached 57 kg/s for the manure–straw mixture and 66 kg/s for the manure–sawdust mixture, while the corresponding power consumption was 5.956 and 5.827 kW. The minimum specific energy consumption was 0.0290 and 0.0244 kWh/t, respectively. Increasing the cutter spacing to 0.155 m increased specific energy consumption by 62.4% and 45.9%, respectively. The results demonstrate that specific energy consumption can be used as an integrated criterion for selecting the operating parameters of milling unloading devices for vertical composting units.

Сведения

Опубликовано
2026 · Т. 1, № 3, С. 104-118
Язык
Русский
ISSN
3134-853X · 3134-8548
Издатель
West Kazakhstan Agrarian Technical University named after Zhangir Khan