Central AsianResearch Index

<b>ТЕОРИЯ УПРОЧНЕНИЯ КОМПОЗИЦИОННЫХ ГАЛЬВАНИЧЕСКИХ ПОКРЫТИЙ</b>

The article proposes a hypothesis according to which, in order to strengthen electroplated coatings modified with nanoscale particles, it is necessary to form an optimal structural state of the material, achieved by increasing the density of dislocations and grinding the grain structure of the coating. The influence of nanodispersed particles on the processes of crystallization and defect formation during electrodeposition is considered, which leads to a significant change in the physico-mechanical characteristics of the formed layers.A theoretical model of galvanic coating hardening has been developed when nanoparticles of various nature are introduced into the electrolyte. The model takes into account the main mechanisms of dispersion hardening, grain boundary hardening (according to the Hall–Petch type), as well as the influence of the matrix–particle interfacial interaction. Based on the proposed approach, the dependence of the microhardness of composite coatings on the physico-mechanical properties of nanodispersed particles, their size, concentration in the electrolyte, and uniformity of distribution in a metal matrix is theoretically substantiated.Special attention is paid to the influence of deposition conditions on the formation of the defective structure and morphology of the coating, including the parameters of current, temperature and hydrodynamic regime. It is shown that the optimization of these factors makes it possible to achieve the maximum hardening effect due to the synergetic interaction of the mechanisms of dispersion and grain boundary hardening.The calculations performed according to the proposed theoretical model showed its satisfactory convergence with experimental data, with a relative error of 3.35%, which confirms the adequacy and applicability of the model for engineering calculations.The proposed model can be used to predict the microhardness of nanocomposite electroplating coatings and, as a result,, to assess their wear resistance under friction conditions. This opens up opportunities for the targeted design of functional coatings with a given set of operational properties that are in demand in mechanical engineering, instrumentation and tribotechnics. An important aspect is also that the introduction of nanoparticles into the electrolyte leads to a change in the kinetics of electrodeposition, which manifests itself in a modification of the rate of nucleation and growth of crystallites. In this case, nanoparticles can be adsorbed on the surface of the cathode, forming additional energy barriers for grain enlargement. This helps to stabilize the fine-grained structure and increase the uniformity of the coating, which directly affects its performance and wear resistance.

Сведения

Опубликовано
2026 · Т. 1, № 2, С. 82-95
Язык
Русский
ISSN
3134-853X · 3134-8548
Издатель
West Kazakhstan Agrarian Technical University named after Zhangir Khan