Central AsianResearch Index

Influence of Vessel Material on the Effectiveness of Ultrasonic Treatment of Metalworking Fluids

This article reviews the influence of process vessel material on the effectiveness of ultrasonic treatment of liquid media. The physical processes occurring when ultrasonic waves interact with the liquid–vessel wall interface are considered, including the reflection, transmission, absorption, and scattering of acoustic energy. The effects of specific acoustic impedance, density, stiffness, wall thickness, and the vibration-damping capacity of the material on acoustic pressure distribution, cavitation field formation, acoustic streaming intensity, and heating of the treated medium are analysed. Vessels made of glass, polymers, and metals used in ultrasonic cleaning, dispersion, emulsification, extraction, and regeneration of metalworking fluids are compared. It is shown that the influence of vessel material should be considered in relation to vessel geometry and dimensions, wall thickness, the method of ultrasonic energy transmission, transducer position, and the volume of the treated liquid. The theoretical considerations are compared with previously obtained experimental results on the ultrasonic treatment of a metalworking fluid in glass and polypropylene vessels. The observed differences in the physical processes and changes in the monitored parameters confirm that the properties of the vessel walls must be considered when selecting ultrasonic treatment parameters. The main requirements for vessel material selection are established, and directions for further research into the transducer–liquid–process vessel system are proposed.

Сведения

Опубликовано
2026 · № 3, С. 94
Язык
Английский
ISSN
2706-977X
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
Abylkas Saginov Karaganda Technical University