Design and Structural Assessment of a Special Boring Tool with an Inclined Clamping Mechanism
The machining of large-diameter stepped holes requires high rigidity and positional stability of the cutting tool, particularly when boring bars with considerable overhang are employed. In addition to the structural characteristics of the boring bar, the cutting element clamping mechanism influences load transfer and displacement of the cutting edge during machining. This study presents the design and structural assessment of a special boring tool incorporating an inclined clamping mechanism. A three-dimensional model of the developed tool was created and subjected to finite element analysis to evaluate the deformation behavior of the cutting element during boring of a Ø295 mm hole. The structural response was assessed using total deformation and directional deformation components along the X, Y, and Z axes. The total deformation ranged from 0.17905 to 0.23775 mm, with a maximum value of 0.23775 mm. Directional analysis revealed maximum absolute displacements of 0.20932 mm, 0.094113 mm, and 0.088974 mm along the X, Y, and Z axes, respectively. The X-axis was identified as the dominant deformation direction, with displacement approximately 2.22 and 2.35 times greater than those along the Y- and Z-axes, respectively. The results demonstrate the importance of considering directional deformation when assessing the structural behavior of cutting assemblies and provide a quantitative basis for evaluating the rigidity and positional stability of the proposed inclined clamping mechanism.
Сведения
- Опубликовано
- 2026 · № 3, С. 141
- Язык
- Английский
- ISSN
- 2706-977X
- Издатель
- Karaganda Technical University named after Abylkas Saginov
- Лицензия
- mmet.kstu.kz/post/view?id=35
- Аффилиации
- Abylkas Saginov Karaganda Technical University