Comparative Mechanical Performance of Cylindrical and Cuboid Pore Geometries in Additively Manufactured ABS Bone Scaffolds
Synthetic bone scaffold must possess a good balance of porosity and mechanical strength for success of the tissue engineering process. With availability of additive manufacturing (AM) technology, it is possible to fabricate porous scaffolds with customised porosity, pore shape and size; which was rather difficult for the traditional processes. This paper presents design, analysis and additive manufacturing of ABS porous bone scaffolds. It also compares mechanical behaviour of the porous scaffolds with different pore geometry. Initially, two CAD models with same porosity but different pore geometry were created in Solidworks®2016. Then, finite element analysis (FEA) of both the scaffolds was conducted in ANSYS® Workbench for von-Mises stress, elastic strain and total deformation by applying a compressive load of 500N. On comparing, stress-strain curve of scaffold with cylindrical channels found to be steeper than scaffold with cuboid channels. Moreover, Young’s modulus of scaffold with cylindrical channels (2587 MPa) was found greater than the scaffold with cuboid channels (2512 MPa). Stress-strain curve obtained via physical testing of specimens also found to follow similar tends. This result leads to conclude that scaffolds with cylindrical channels can withstand more loads in comparison with scaffolds with cuboid channels for the same porosity
Сведения
- Опубликовано
- 2026 · № 1, С. 81
- Язык
- Английский
- ISSN
- 2706-977X
- Издатель
- Karaganda Technical University named after Abylkas Saginov
- Аффилиации
- Jaypee University of Engineering and Technology, Guna