Central AsianResearch Index

The Effect of Laser Post-Processing on NiCrMoSiBFeCuC Thermally Sprayed Coatings

During the study, a nickel–chromium-based coating was formed on structural steel S235 using flame spraying technology. A NiCrMoSiBFeCuC powder mixture with the following composition was used for coating formation: ~67% Ni; 0.45% C; 4.11% Si; 3.92% B; 2.72% Fe; 15.7% Cr; 1.94% Cu; 4.69% Mo. The sprayed coatings were remelted using a gas torch at a temperature of 1100 °C in air. At the next stage of coating formation, the samples were processed with a fiber laser under four processing speed modes - without beam oscillation and with oscillation amplitudes of 1 mm and 3 mm. The aim of this study was to investigate the effect of laser processing on NiCrMoSiBFeCuC coatings formed by spraying followed by gas torch remelting. The shape and geometry of the laser-remelted tracks, microhardness of the samples, as well as tribological properties and wear resistance were investigated. The combined method of coating formation, including spraying followed by laser treatment, allows the formation of a continuous or localized NiCrMoSiBFeCuC coating layer with increased microhardness and wear resistance on the surface of the component

Сведения

Опубликовано
2026 · № 1, С. 120
Язык
Английский
ISSN
2706-977X
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
Vilnius Gediminas Technical University