Central AsianResearch Index

Enhancing Fire Resistance of Geopolymer Concrete Through Steel Fiber Reinforcement: Microstructure and Mechanical Behavior at Elevated Temperatures

This paper investigates the thermo-mechanical performance of steel fiber reinforced GPC using a combination of fly ash (FA), ground granulated blast furnace slag (GGBS), and ordinary Portland cement (OPC) in binder. The geopolymer matrix was activated with a binary solution containing sodium silicate–sodium hydroxide and the alkaline activator–to–binder by mass for 0.40, with hook-end steel fibers added at volume contents of 0%, 0.5%, 0.75%, and 1.0%. In addition, its mechanical properties such as compressive, split tensile and flexural strengths were tested at room temperature before and after exposure to high temperatures of 250, 500 and 750°C with account for microstructural evolution using X-ray diffraction (XRD) and scanning electron microscopy (SEM) to reveal the effect on thermal degradation and strength maintenance. It is shown that the addition of steel fibers can improve both ambient and residual mechanical properties, and a 1.0% fiber volume fraction has the best strength preservation behavior at all temperatures. However, the residual compressive, tensile and flexural strengths of fiber-reinforced GPC were much higher than that of the plain mix at different temperatures even if a decline with a raise in temperature was inevitable, especially at 750°C presence considerable values, microstructural studies verified that matrix densification is higher developed due to effective crack bridging and promoted interfacial bonding lead adding fibers is responsible for superior fire resistance. These results emphasize the potential of SFRC GPC as an elevated temperature structural fireproof and environmentally friendly building material.

Сведения

Опубликовано
2025 · Т. 4, С. 93
Язык
Английский
Цитирований
1
ISSN
2706-977X
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
Technical Engineering College of Kirkuk
Universiti Kebangsaan Malaysia
College of Engineering and Engineering Techniques