Central AsianResearch Index

Tests and Analysis of the Rigidity of a Safety Fence

Today's Industry 4.0 requirements, including production automation, necessitate the securing of production lines to ensure maximum safety for employees. This article presents a solution for fastening systems in safety fences used on production lines. The main objective of the research was to compare the rigidity of the entire fence, i.e., a set of different elements, depending on the fastening system used for the mesh panel and fence post, based on simulation tests. Both commercially available solutions and own solutions were compared. The parameter for evaluating the solutions is the maximum displacement value, which is derived from computer simulation and allows for an estimation, within a certain range, of the behavior of the system under real conditions. The maximum displacement values recorded during the simulation range from 14 to 20 mm. Achieving the appropriate level of fence rigidity is required to ensure safety on the production line, and the use of an appropriate solution allows for an increase in safety and working conditions. The analysis carried out allowed the behavior of the object as a result of the force to be estimated, but it completely ignores material aspects and factors such as heat distribution, vibrations or parameters that vary in reality, such as the condition of the material, temperature, or the environment in which the tested object is located

Сведения

Опубликовано
2025 · № 3, С. 41
Язык
Английский
ISSN
2706-977X
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
Poznań University of Technology