Central AsianResearch Index

Using the Method of Probabilistic Deterministic Experiment to Assess the Impact of Alloying Elements on the Properties of the Quasi High-Entropy Alloy of the Fe-Cr-Ni-Co-Mn System

Aizhan Rymkulkyzy Abildina, Aristotle Zeinullinovich Issagulov, Yelena Petrovna Shcherbakova, Svetlana Sergeyevna Kvon

This article considers the issues of planning experiments in testing wear resistance, hardness and tensile strength of the Cantor alloy. Basic experiments were carried out and an experimental matrix was developed. An experimental planning matrix was developed and calculated to conduct the basic experiments. The input and output parameters of the experiment were determined. The following were selected as input parameters: the niobium content from 14 to 18%; the carbon content from 1.5 to 2.5%; press pressure from 80 to 100 MPa. The output parameters were wear resistance, hardness and tensile strength. As a result, a six-factor matrix of experiments on five levels was used, in which three factors were vacant. Based on the data obtained, experiments were carried out on smelting an experimental quasi high-entropy alloy of the CoCrFeMnNi system with different niobium contents under laboratory conditions.

Сведения

Опубликовано
2025 · № 1, С. 56
Язык
Английский
Цитирований
1
ISSN
2706-977X
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
Abylkas Saginov Karaganda Technical University
Kaliningrad State Technical University