Central AsianResearch Index

Influence of Processing Conditions on the Particle Size Distribution of Recycled Cable Insulation

The particle size during the shredding process of electrical cables primarily affects the efficiency of copper separation from plastic and the energy consumption of the processes. This article aims to determine the particle fractions of plastic materials (cable sheathing) after the shredding and electrostatic separation processes. The size of these particles is significant for further material applications, such as being used as a filler in concrete instead of gravel (influencing mechanical properties). The tested granulate A was obtained during shredding in a machine equipped with a screen with 1.5 mm diameter openings, while granulate B was obtained during shredding with a machine equipped with a screen with 1 mm diameter openings. In the case of granulate A, originating from the shredding process with a 1.5 mm screen, the main fractions were: 65.5% above 1.4 mm, 27.4% between 1.4 mm and 1 mm, and 7% below 1 mm. Granulate B, derived from the shredding process of electrical cables with a 1 mm screen, showed a more diverse fraction distribution than granulate A. The dominant fraction was between 1 mm and 0.71 mm (34.1%), followed by 0.71 mm to 0.5 mm (28.2%), and 0.5 mm to 0.25 mm (28.8%). The extreme fractions - above 1 mm and below 0.25 mm - constituted 1.4% and 7.5%, respectively. A smaller screen (1 mm) leads to a more varied fraction distribution, with a higher proportion of smaller particles, resulting in higher bulk density and improved potential for applications such as concrete fillers. This knowledge can contribute to a better understanding of the mechanical properties of materials utilizing these granulates as fillers in their structure

Сведения

Опубликовано
2024 · № 4, С. 71
Язык
Английский
Цитирований
1
ISSN
2706-977X
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
Poznań University of Technology
Technical University of Zvolen