Central AsianResearch Index

Evaluation of Dry Sliding Wear Characteristics in Al5052/TiB2/ZrO2 Composites Against EN-31 Steel Counterbody

The current study inspected the dry sliding wear characteristics of composites with Al5052 matrix. The composites were stir-casted with nano-TiB2 and nano-ZrO2 as reinforcements. The test specimens were examined using a pin-on-disc device with an EN-31 steel disc under multiple loads (10 N, 20 N, and 30 N) and speeds (0.94 m/s, 1.57 m/s and 2.20 m/s). To inspect the worn surfaces, scanning electron microscopy is utilized. The wear rate increased with the load, reaching a maximum value at 30 N. The resistance to wear for Al5052-based composite with 1% TiB2 and 1% ZrO2 was found to be best. The wear rate was observed to increase initially at 1.57 m/s and then decrease when the speed was increased to 2.20 m/s. SEM micrographs revealed abrasion and delamination of the worn-out surfaces

Сведения

Опубликовано
2024 · № 4, С. 44
Язык
Английский
Цитирований
6
ISSN
2706-977X
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
National Institute of Technology Kurukshetra