Central AsianResearch Index

Investigating the Influence of Carbon Nanotubes on Basalt Fiber Nano Hybrid Composite Properties: a Dynamic Mechanical Analysis

This paper investigates the structure-property relationships in basalt fiber reinforced polymer composites doped with multi-walled carbon nanotubes (CNTs). Basalt fabrics were reinforced with 0.2-0.8 wt% CNTs using hand layup and compression molding to fabricate laminated plates. The mechanical, morphological, and thermomechanical properties were characterized using tensile, flexural, impact, SEM, FTIR, XRD, and DMA testing. Results showed that increasing CNT percentage led to progressive surface decoration and eventual obscuration of the underlying basalt fibers as observed by SEM. FTIR revealed a transition from basalt-dominated to CNT-dominated spectra with higher loadings. While tensile strength improved up to 0.4% CNTs before decreasing, flexural strength declined initially up to 0.4% before consistent enhancements. However, impact energy decreased gradually with more CNTs due to embrittlement effects. An optimal CNT loading of 0.4-0.6 wt% was found to maximize the mechanical performance through uniform dispersion and interfacial adhesion. DMA showed increased stiffness but reductions in damping and degradation resistance above 0.6 wt% CNTs. Overall, CNTs can substantially reinforce basalt fiber composites within an optimal composition range contingent on controlled aggregation and processing conditions

Сведения

Опубликовано
2024 · № 4, С. 110
Язык
Английский
ISSN
2706-977X
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
Jawaharlal Nehru Technological University, Hyderabad