Investigation of Energy Consumption Optimization of a Screw Mixer with an Active Return Channel
The article is devoted to improving the energy efficiency and quality of dry feed preparation in small and medium-sized farms. A three-factor experiment was used to examine the influence of the working tool speed (2.5-3.5 s-1), mixing time (120-240 s), and body tilt angle (25-35°) on the coefficient of variation and specific energy consumption. It was found that at a rotation speed of 3.5 s-1, a mixing time of 180-240 s, and a tilt angle of 30°, the coefficient of variation achieved is no more than 10%, which meets process requirements, while specific energy consumption is reduced to 12-15% compared to the baseline mode. The regression models obtained are reliable at a significance level of 0.95. The use of an active return channel ensures the formation of stable circulation flows and the elimination of stagnant zones.
Сведения
- Журнал
- Trudy Universiteta
- Опубликовано
- 2026 · Т. 3, № 104, С. 3
- Язык
- Английский
- ISSN
- 1609-1825 · 2710-3382
- Издатель
- Karaganda Technical University named after Abylkas Saginov
- Лицензия
- tu.kstu.kz/edition_policy
- Аффилиации
- West Kazakhstan University of Innovation and Technology
Tambov State Technical University