Central AsianResearch Index

Optimization of Technological Parameters the Process of Grinding Materials Based on Mathematical Modeling of the Second the Order

The article used second-order mathematical modeling. The results of a study on optimizing the technological parameters of the process of grinding materials in a spring-rotor mill are presented. Based on the planning of the experiment with five different factors, secondary polynomial models were obtained for the five main output parameters: grinding, performance, drive power, specific energy intensity and specific metal capacity. Based on the analytical solution of the system of equations, optimal values of technological parameters were found that provide maximum productivity with minimal energy consumption and the required quality of products. The scientific novelty of the work was the development of a comprehensive simulation of the crushing process, taking into account five technological parameters and five output parameters at the same time, as well as an analytical method for determining the optimal operating modes for a multidimensional task. The results of the study show the possibility of increasing productivity by 15-20%, reducing power consumption by 8-12% compared to empirically established operating modes.

Сведения

Журнал
Trudy Universiteta
Опубликовано
2026 · Т. 2, № 103, С. 248
Язык
Английский
ISSN
1609-1825 · 2710-3382
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
LLP «Europlyus Vostok»
LLP Europlus Vostok
Wrocław University of Science and Technology
D. Serikbayev East Kazakhstan State Technical University