Central AsianResearch Index

Experimental and Industrial Testing of Silicate Brick Production Technology Using Modifying Additives

As a result of tests carried out under industrial conditions, the influence of using modifying waste materials in the production process of silicate brick on its main performance properties was evaluated. The studies were conducted at an operating silicate brick manufacturing plant, where experimental and industrial trials were performed on full-size brick specimens produced under factory conditions. Ground waste glass and expanded clay dust were introduced into the silicate mass as modifying additives. The research results showed that, while maintaining the normative levels of compressive strength and frost resistance, the modified silicate brick exhibits reduced average density and thermal conductivity coefficient. In addition, the use of expanded clay dust made it possible to obtain bricks with a natural brown shade without the use of special mineral pigments. The obtained results confirm that the modified silicate brick is an energy-efficient, reliable in service, and economically viable wall construction material.

Сведения

Журнал
Trudy Universiteta
Опубликовано
2026 · Т. 2, № 103, С. 183
Язык
Английский
ISSN
1609-1825 · 2710-3382
Издатель
Karaganda Technical University named after Abylkas Saginov
Аффилиации
Zhangir Khan West Kazakhstan Agrarian Technical University
Korkyt Ata Kyzylorda State University
Warsaw University of Technology