Determining the Depth of Inclusion in the Underlying Environment
The work is devoted to the problem of determining the depth of inclusion in the underlying environment. The algorithm for determining the depth of occurrence is based on the sensing method using georadar hardware of the Loza-V series. There are two methods of GPR surveying: «profiling» and «probing». When profiling, the radar moves along the path along with the transmitting and receiving antennas. During sounding, one path point is selected, then a series of registrations of reflected signals are carried out with the source and receiver antennas spaced at equal distances in different directions. As a result of these measurements, a hodograph is obtained – a function of the delay time of the reflected signals [1]. Based on two measurements of signal delays and known distances between the receiver and the source, the depth of the inclusion is determined
Сведения
- Журнал
- Trudy Universiteta
- Опубликовано
- 2024 · Т. 1
- Язык
- Английский
- ISSN
- 1609-1825 · 2710-3382
- Издатель
- Karaganda Technical University named after Abylkas Saginov