Study of the stress-strain state of the sides of the Muruntau quarry taking into account tectonic forces
В работе рассматривается вопрос использования численных математических методов для решений задач геомеханики, в частности, при оценке устойчивости бортов и откосов карьеров. При моделировании устойчивости борта карьера с помощи программного продукта «Ustoi» решена задача по пространственной геомеханической модели карьера Мурунтау. Построены пространственные изолинии напряжений, смещений, коэффициента запаса прочности. Полученные коэффициенты запаса устойчивости находятся в пределах допустимых значений. По результатам компьютерного моделирования напряженно-деформированного состояния выявлено, что концентрации напряжений находятся под днищем карьера. Установлено, что с увеличением глубины карьера изменяется характер распределения напряжения в породном массиве, по борту карьера, и у подошвы откоса возникает наибольшая концентрация сдвигающих напряжений, что частично изменяет общее напряжение поля и образует опасные деформации. The paper considers the use of numerical mathematical methods for solving geomechanics problems, in particular, when assessing the stability of the sides and slopes of quarries. When modeling the stability of the quarry side with the help of the Ustoi software product, the problem of the spatial geomechanical model of the Muruntau quarry was solved. Spatial isolines of stresses, displacements, and the safety margin coefficient are constructed. It is established that at the same time, the instrument array as a whole retains a stable state. According to the results of computer modeling of the stress-strain state, it was revealed that the stress concentrations are located under the bottom of the quarry. It is established that with an increase in the depth of the quarry, the nature of the stress distribution in the rock mass changes, the greatest concentration of shear stresses occurs along the side of the quarry and at the bottom of the slope, which partially changes the total field stress and forms dangerous deformations.
Сведения
- Журнал
- Горный журнал Казахстана
- Опубликовано
- 2021 · № 11(199), С. 25-32
- Язык
- Английский
- ISSN
- 2227-4766
- Издатель
- Interrin Scientific and Production Enterprise LLP