Development of technological solutions and organization of working out of targets with a panel-pillar development system using anchor fastening technology
Анкерная система укрепляет породу, ограничивая движение кровли и позволяя горизонтальному напряжению удерживать кровлю на месте, не давая ей обрушаться. Если высота отслоившейся породы ниже длины анкерных болтов, поведение выработки будет удовлетворительным (при условии, что напряжения в массиве остаются неизменными). Если высота отслоившейся породы выше высоты (длины) анкеров, увеличение напряжения перед забоем вызовет обрушение кровли. Для поддержания выработки потребуется установка более длинных арматурных болтов. В выработке, укрепленной с помощью как анкерного, так и арочного крепления важно, чтобы каждый метод был достаточен сам по себе и обеспечивал необходимое крепление. Технический результат состоит в изготовлении анкерного стержня из проката арматуры винтового профиля с элементами равномерного перемешивания, которые, в свою очередь, исключат возможность появления «эффекта перчатки», увеличив несущую способность анкера. The anchor system secures the rock, limiting the movement of the roof and allowing horizontal stress to hold the roof in place, preventing it from collapsing. If the height of the detached rock is lower than the length of the anchor bolts, the mining behavior will be satisfactory (provided that the stresses in the array remain unchanged). If the height of the detached rock is higher than the height (length) of the anchors, an increase in the stress before the face will cause the roof to collapse. To maintain the production, the installation of longer reinforcing bolts will be required. In the development, reinforced with both anchor and arch fastening, it is important that each method is sufficient in itself and provides the necessary (required) fastening. The technical result is the manufacture of an anchor rod from rolled reinforcement of a screw profile with elements of uniform mixing, which in turn will exclude the possibility of «the appearance of the glove effect» and also increase the bearing capacity of the anchor by 15-20%.
Сведения
- Журнал
- Горный журнал Казахстана
- Опубликовано
- 2021 · № 8(196), С. 23-29
- Язык
- Английский
- ISSN
- 2227-4766
- Издатель
- Interrin Scientific and Production Enterprise LLP