Central AsianResearch Index

Testing of the lead cycle of polymetallic ore flotation using the simplex planning method

Разработка технологии обогащения промпродукта магнетитовых руд

На пробе промпродукта магнитного обогащения руды месторождения Атансор выполнены исследования по определению гравитационной и магнитной обогатимости с целью разработки технологии ее переработки. В результате проведенных исследований установлено, что распределение содержания железа по классам крупности относительно содержания в промпродукте практически равномерное. На основании результатов, полученных при выполнении фракционного анализа и гравитационном обогащении промпродукта отсадкой, а также минералогических исследований, которые показали тонкозернистую вкрапленность магнетита, можно констатировать, что для раскрытия минеральных зерен в магнитном промпродукте руды месторождения Атансор требуется тонкое измельчение. Для получения железных концентратов с содержанием железа не менее 55% рекомендуется использовать мокрое магнитное обогащение. The object of the study is a technological sample of the industrial product of magnetite ores of the Atansor deposit. The granulometric composition of the initial industrial product with a fineness of 20 – 0,0 mm and the nature of the distribution of iron by fineness classes were determined. Studies were carried out to determine the gravitational richness of magnetite industrial products with a size of 20 – 1 mm and 1 – 0,071 mm by fractional analysis. The nature of the distribution of iron in the classes with a size of 20-1 mm and 1 – 0,071 mm in the fractions of density: more than 3000 kg/m3, 3000-2850 kg/m3, 2850-2750 kg/m3 and less than 2750 kg/m3 is determined. The gravitational richness of the magnetite industrial product of various sizes and the separation density required for the production of iron concentrates with an iron content of more than 55% are determined. Theoretically possible technological indicators of gravity enrichment of machine classes of size are determined. Studies on the deposition of class 20 – 1 mm were carried out. Studies on the magnetic separation of crushed industrial products with a grain size of 0.1-0.0 mm were carried out and the parameters of the magnetic separation process were determined when obtaining a concentrate with an iron content of more than 55%. The results of the research proved that the use of gravity processes for the enrichment of industrial products of magnetite ores will not allow to obtain concentrates with the required iron content of at least 55%. Based on the results of the research, the principal possibility of using the magnetic separation process for the enrichment of industrial products of magnetite ores is proved.

Сведения

Опубликовано
2021 · № 6(194), С. 32-38
Язык
Английский
ISSN
2227-4766
Издатель
Interrin Scientific and Production Enterprise LLP