Central AsianResearch Index

SYNTHESIS, X-RAY DIFFRACTION AND THERMODYNAMICS OF CUPRATE-VANADATE-MANGANITE LAВАCUVMNO7,5

The paper reports the preparation and characterization of the cuprate–vanadate manganite LaBaCuVMnO7,5 . The compound was obtained by a ceramic solid-state route, after which its phase composition and structural features were examined by X-ray diffraction. Analytical indexing of the diffraction pattern showed that LaBaCuVMnO7.5 is described by a cubic unit cell with the following parameters: a = 14.99 ± 0.02 Å; V0 = 3367.85 ± 0.06 Å3; Z = 4; V0el.cell = 841.96 ± 1.58 Å3; ρx-ray = 4.46 g/cm3; ρpycn . = 4.45 ± 0,007 g/cm3. The heat capacity of LaBaCuVMnO7,5 was measured on an IT-S-400 calorimeter over the temperature interval 298.15–673 K. Prior to the measurements, the calorimetric system was calibrated through the thermal conductivity of the heat-flow meter using a copper standard and an empty ampoule. For each temperature point, taken at 25 K intervals, five repeated measurements were carried out; the resulting values were averaged and statistically processed. The reliability of the apparatus was additionally checked by measuring the heat capacity of α-Al2 O3 . On the basis of the experimental Cp data, equations for the corresponding temperature intervals were obtained. The Cp(T) curve contains λ-type anomalies, which indicate second-order phase transformations. The thermodynamic functions H°(T) – H°(298.15), S°(T), and Φxx(T) were calculated for the investigated compound. The obtained results provide a basis for subsequent studies of the electrophysical behavior of LaBaCuVMnO7,5 and may be used when assessing its physicochemical characteristics and certifying the laboratory sample. Keywords: Cuprate-vanadate-manganite, solid-phase synthesis, X-ray diffraction, thermodynamics, heat capacity.

Сведения

Опубликовано
2026 · № 3,2026, С. 424-434
Язык
Английский
ISSN
1680-9165 · 2788-8770
Издатель
Toraighyrov University