Science and Technology of Kazakhstan, 2026, № 3,2026, с. 369-380
INVESTIGATION OF THE PROCESS OF CHROMIUM-MANGANESE LIGATURE PRODUCTION UNDER LARGE-SCALE LABORATORY SMELTING CONDITIONS
Аннотация · Abstract
This study presents the development of a technology for producing chromium manganese ligature under large-scale laboratory smelting conditions using a 100 kVA refining electric furnace. The charge materials included ferromanganese ore from the Kerege-Tas deposit and ferrosilicochrome (FeSiCr) dust generated during crushing. FeSiCr dust was used as a reducing agent due to its high silicon content. Seven smelting runs were carried out, resulting in the production of chromium manganese ligature with the desired composition. The average chemical composition of the obtained alloy was: Fe – 35.63 %, Mn – 40.30 %, Cr – 20.94 %, Si – 4.54 %. The physico-chemical properties of the alloy were studied using X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD analysis revealed the presence of an α-solid solution (Fe, Cr, Mn), as well as silicide phases FeSi and Cr5 Si3 . SEM images showed pronounced microstructural heterogeneity, porosity, and contaminant inclusions, which are associated with the uneven distribution of major elements within the alloy volume. The results confirm the feasibility of efficiently producing chromium-manganese ligature using FeSiCr dust and low-grade manganese ore, which is relevant for resource-saving metallurgical technologies in the context of Kazakhstan. Keywords: chromium-manganese ligature, reducing agent, iron-manganese ore, ferrosilicochromium dust, phase analysis, scanning electron microscopy, X-ray diffraction.
Сведения · Details
- DOI 10.48081/nitk3.2026/369-380
- Журнал · Journal Science and Technology of Kazakhstan
- Язык · Language английский
- Цитирования (Crossref) · Citations 0