Central Asian Research Index

Science and Technology of Kazakhstan, 2025, № 4, 2025, с. 296-306

ANALYSIS OF SAMPLES PRODUCED BY MELTING USING BRIQUETTES MADE FROM SHH15 METAL TURNINGS

V. Yu. Kulikov, Y. A. Baiseitova, T. V. Kovaleva, Sh. N. Tulegenova

Аннотация · Abstract

The problem of secondary processing of fine industrial waste remains a pressing issue for many metallurgical enterprises due to its impact on production efficiency and the environmental situation in the surrounding area. This is especially relevant for foundries, where coarse scrap—such as defective castings and sprues—is reused directly, while fine-grained waste from mechanical processing is typically discarded. A significant proportion of such waste is formed during the machining of high-carbon chromium steel ShH15, widely used in the manufacture of bearing parts. The operations of grinding, turning, and polishing result in the formation of fine powder-like particles that are difficult to recycle due to oxidation and contamination with lubricants and cooling fluids. An effective way to utilize this material is through the cold briquetting method, which consists of mixing the steel dust with binders and compacting it under pressure into briquettes suitable for melting in induction or arc furnaces. This approach not only reduces the volume of waste sent to landfills but also returns valuable alloying components to the production cycle, improving resource efficiency. Additionally, briquetting helps reduce the environmental burden and contributes to the development of closed-loop metallurgical technologies. When properly formulated, the resulting briquettes exhibit sufficient strength, low porosity, and compatibility with melting processes. Optimized compositions allow the use of briquettes as cost-effective charge material, promoting sustainable steel production practices [1;2;3]. Keywords: cold briquetting, bearing steel waste, mechanical processing, microstructure, resource recovery, porosity, strength characteristics, sustainable metallurgy.

Сведения · Details