Central Asian Research Index

Science and Technology of Kazakhstan, 2024, № 4.2024, с. 205-215

FEATURES OF OBTAINING A MAGNETRON COATING ON Ti-6Al-4V ALLOY WITH VARIOUS COPPER CONTENT

B. N. Azamatov, P. S. Varbanov, M. A. Sadenova, A. A. Borisov, B. Maratuly

Аннотация · Abstract

In the modern world, metals play an invaluable role in various industries. Medical engineering has become an important area of development in modern metallurgy. The disadvantage of Ti-6Al-4V alloy is microbial colonization on its surface, as well as the release of toxic aluminum and vanadium metals into the surrounding tissues, so research on improving the anti-corrosion and antibacterial properties of Ti6Al4V alloy is currently a serious problem. Two-component metal coatings based on Cu-Ta and Cu-Nb were obtained by magnetron sputtering with joint spraying of targets made of pure metals Cu, Nb, Ta. It was found that coatings with a thickness of 10 microns demonstrated a different degree of antimicrobial efficacy during two days of testing: the maximum inhibition zone of the Ta-Cu coating reached 24.0 mm for S. Aureus and 17.0 mm for C. Albicans. For the Nb-Cu coating with a thickness of 10 microns, the maximum inhibition zone reached 25.0 mm for S. Aureus and 15.5 mm for C. Albicans. It has been shown that with the same thickness, Ta-Cu coatings are better suited to protect the endoprosthe-sis from microbial infections than Nb-Cu coatings. Keywords: magnetron, metals, alloy, coating, copper.

Сведения · Details