Central Asian Research Index

Science and Technology of Kazakhstan, 2026, № 2, 2026, с. 271-283

MAIN DESIGN FEATURES AND CONCEPTUAL JUSTIFICATION OF CAM-SCREW MECHANICAL PRESSES

T. T. Sharatbekov, B. N. Absadykov, E. S. Askarov

Аннотация · Abstract

This paper presents a review and conceptual design justification of a mechanical press with a combined cam-screw actuator and a bottom-mounted drive. A comparative analysis of existing press equipment is conducted in order to identify the limitations of traditional crank, screw, toggle, and eccentric press designs. Based on this analysis, a conceptual layout of a cam-screw mechanical press with a lower drive arrangement is proposed as a promising direction for further engineering development. The paper discusses the possibility of using a cam profile to provide smoother tool approach to the workpiece and to reduce impact interaction during the initial stage of deformation. The proposed approach is considered at the conceptual level and forms the basis for further development of a detailed kinematic and dynamic model. Preliminary conceptual analysis indicates that a cam-screw press with a bottom-mounted drive may provide improved maintenance conditions, reduced impact loads, and better dynamic stability due to the lower location of the main drive components. The bottom-mounted drive is a strategic design solution that increases stability (vibration resistance), improves maintenance (drive units are within easy reach), and keeps the work area clean, as gearbox oil does not spill onto the workpiece. The proposed layout may contribute to reducing the overall press height and metal consumption; however, quantitative confirmation of these advantages requires further engineering calculations, numerical simulation, and experimental validation. The research results can be used in the design of next-generation high-precision cam-and-screw equipment, particularly for precision blanking, calibration, and micro-stamping equipment. Keywords: mechanical press, cam-screw mechanism, bottom drive, press design, kinematics, cam profile, dynamic stability, shock-free engagement.

Сведения · Details