Science and Technology of Kazakhstan, 2026, № 1, 2026, с. 258-270
STUDY OF PHYSICAL AND CHEMICAL PROPERTIES OF PELLETS OBTAINED FROM ALUMINUM SLAG
Аннотация · Abstract
This paper examines the physicochemical and mineralogical properties of pellets produced from secondary aluminum slags with the addition of silica-enriched aspiration dust from ferroalloy production. To incorporate finely dispersed industrial waste into metallurgical processing, a pelletizing method was applied in a disk granulator using an aqueous lignosulfonate solution as a binder. The resulting pellets were subjected to high-temperature firing at temperatures of 600, 800, and 1000 °C. The phase and mineralogical composition were studied using X-ray diffraction and petrographic analysis, and the microstructure was analyzed using electron microscopy. It was found that increasing the firing temperature intensifies solid-phase interactions and forms calcium silicate and aluminosilicate phases, such as wollastonite, dicalcium silicate, and mullite. The introduction of aspiration dust with a high SiO₂ content helps reduce the sintering onset temperature and strengthen the pellet structure by forming a binding silicate matrix. It has been shown that optimizing the composition and firing temperature allows for the production of heat-resistant and mechanically strong pellets, promising for use in processes for producing ferrosilicon with increased aluminum content. Keywords: Aluminum slag, pellets, pelletizing, X-ray phase analysis, ferrosilicon.
Сведения · Details
- DOI 10.48081/bgqf1923
- Журнал · Journal Science and Technology of Kazakhstan
- Язык · Language английский
- Цитирования (Crossref) · Citations 0