Science and Technology of Kazakhstan, 2026, № 1, 2026, с. 162-173
DEVELOPMENT OF A CENTRIFUGE WITH A CONICAL ROTOR FOR THE PRIMARY PURIFICATION OF VEGETABLE OILS
Аннотация · Abstract
The article presents the results of the development and testing of a conical rotor centrifuge for the primary purification of vegetable oils, specifically safflower oil, using flax fibers as a filter material. The design of the installation is described, combining centrifugal separation with barrier filtration through a layer of fibrous material. Experimental studies were conducted to determine the optimal operating parameters: oil temperature (35 °C), mass fraction of impurities (0,1 %), and separation factor (1300). It has been established that the proposed technology allows achieving an oil purification degree of up to 93% and reducing the sludge content to 0,02 %. Using experimental design methods, a regression equation was obtained, describing the influence of the main factors on the process efficiency. The developed centrifuge is an economically efficient solution for small and medium-sized processing enterprises, promotes the implementation of resource-saving technologies and the utilization of secondary raw materials. Furthermore, it demonstrates significant potential for adaptation to other types of oils and production conditions. Keywords: centrifuge, press, filtration, vegetable oil, flax fibers, mechanical impurities.
Сведения · Details
- DOI 10.48081/bgqf1915
- Журнал · Journal Science and Technology of Kazakhstan
- Язык · Language английский
- Цитирования (Crossref) · Citations 0