Central AsianResearch Index

THERMODYNAMIC MODELLING OF THE CORROSION PROCESS OF Fe–Cr–Ni ALLOYS IN A SULFATE-BEARING AGGRESSIVE MEDIUM: DEVELOPMENT OF AN OPTIMAL COMPOSITION BASED ON THE NERNST EQUATION AND POURBAIX DIAGRAMS

This paper presents a thermodynamic model of the corrosion process of the Fe–(0–20%)Cr–(0–10%)Ni alloy system in an aggressive liquid medium containing 10–50 g/L H2SO4, 1–6 g/L Cu2+ and Fe3+ ions, characteristic of the hydrometallurgical division of Almalyk MMC JSC. The scientific problem addressed is that purely experimental optimization of corrosion-resistant coating compositions is time- and resource-intensive, which motivates a theoretically predictive thermodynamic approach. Pourbaix diagrams were constructed over the temperature range 25–70 °C on the basis of the Nernst equation and the Gibbs–Helmholtz formula. The influence of Cr and Ni content on the corrosion rate was evaluated using the polarization-resistance (Stern–Geary) method. According to the results, Fe+18%Cr+6%Ni was identified as the optimal composition (Vcorr = 0.011 mm/year). The scientific novelty of the study lies in the integrated thermodynamic–electrochemical modelling framework developed specifically for a sulfate medium containing simultaneous Cu2+ and Fe3+ oxidizers, a combination not previously treated jointly in the reviewed literature. The findings offer a practically applicable basis for selecting corrosion-resistant steel grades and coatings for hydrometallurgical equipment.

Сведения

Опубликовано
2026 · Т. 4, № 8, С. 21-26
Язык
Английский
ISSN
3030-3702
Издатель
LLC Scienceproblems Team