Central AsianResearch Index

DEVELOPMENT OF CERAMIC PROPPANTS BASED ON KAZAKHSTAN ALUMINOSILICATE MATERIALS

This study substantiates the processing parameters for manufacturing domestic ceramic proppants designed to enhance well production rates during the development of tight oil reserves (TOR) in the Republic of Kazakhstan, where over 70% of geological reserves require multi-stage hydraulic fracturing (MSHF). A comprehensive mineralogical and geochemical analysis of the aluminosilicate base from the "Soyuznoye", "Arkalykskoye", and "Krasnooktyabrskoye" deposits was performed. The scientific novelty lies in the theoretical substantiation of the mechanism driving accelerated mullitization and suppressing destructive cristobalite crystallization via the addition of fluorine-containing modifiers. The obtained results demonstrate that thermochemical modification reduces silicate formation and sintering temperatures to 1250–1400 °C while increasing the mullite phase concentration to 78–85%. According to structural models and literature analogues, the optimized matrix guarantees targeted mechanical properties: crush resistance up to 86 MPa at a minimal open porosity of 0.5–2.0%. The practical significance of the research consists in formulating recommendations for import substitution and localizing medium-to-high-strength proppant manufacturing lines within Kazakhstan, aiming to reduce oilfield service costs and implement a "just-in-time" logistics framework.

Сведения

Журнал
Neft i gaz
Опубликовано
2026 · Т. 155, № 5, С. 252-260
Язык
Английский
ISSN
1562-2932 · 2708-0080
Издатель
Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan
Аффилиации
ABAI KAZAKH NATIONAL PEDAGOGICAL UNIVERSITY