Central AsianResearch Index

Study of the catalytic hydrovisbreaking process of vacuum residue for the production of light fractions

This study investigates the effect of preliminary physical activation of vacuum residue using ultrasonic cavitation and its combination with a magnetic field on the efficiency of catalytic hydrovisbreaking. The process was carried out at 450 °C and a hydrogen pressure of 5.0 MPa using an HR-538/Zeocar-600 catalyst system. Feedstock activation included ultrasonic treatment and combined ultrasonic–magnetic field exposure. The results show that physical activation enhances the conversion of heavy hydrocarbons and improves product distribution. The yield of light distillates increases from 56.3% to 63.1%, while gas formation decreases from 9.5% to 5.8% and the fraction above 360°C decreases from 28.7% to 25.7%, without an increase in coke formation. The combined treatment exhibits a synergistic effect, providing greater improvements than ultrasonic treatment alone. In addition, fuel quality improves, with sulfur content decreasing in both gasoline and diesel fractions and aromatic hydrocarbons being reduced, alongside an increase in saturated components. Key performance indicators such as octane and cetane numbers remain essentially unchanged. Overall, the combined application of ultrasonic cavitation and magnetic field treatment represents an effective approach for intensifying hydrovisbreaking, enabling deeper and more selective conversion of heavy feedstock without increasing process severity.

Сведения

Журнал
Neft i gaz
Опубликовано
2026 · Т. 152, № 2, С. 269-277
Язык
Английский
ISSN
1562-2932 · 2708-0080
Издатель
Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan
Аффилиации
INSTITUTE OF PETROCHEMICAL PROCESSES NAMED AFTER ACAD. Y.G. MAMMADALIYEV OF MINISTRY OF SCIENCE AND EDUCATION OF AZERBAIJAN
BAKU HIGHER OIL SCHOOL