Central AsianResearch Index

Engineering calculations of thermal parameters in thermal gas-chemical treatment

Thermal gas-chemical treatment (TGCT), based on the interaction of multicomponent aluminum alloys with formation water, generates heat directly in the bottomhole zone of oil wells. The effectiveness of this treatment is primarily determined by the amount of thermal energy released and the resulting temperature increase in the near-wellbore zone. Engineering design and operational planning require a physically based analytical methodology for quantifying these parameters using fundamental principles of heat transfer. This study presents an engineering calculation approach for estimating the temperature increase and heating radius during TGCT of formations producing high-viscosity oil. The methodology is based on the law of energy conservation and the equation for transient heat conduction in porous media. The proposed approach establishes direct analytical relationships between the mass of the reactive alloy, the absorbed thermal energy, the temperature increase, and the heating radius. All conclusions are based on clearly defined engineering assumptions. The developed methodology represents a consistent and transparent tool for the preliminary assessment of thermal parameters during thermal gas-chemical treatment of the wellbore zone in highly viscous oil reservoirs.

Сведения

Журнал
Neft i gaz
Опубликовано
2025 · Т. 150, № 6, С. 268-281
Язык
Английский
Цитирований
1
ISSN
1562-2932 · 2708-0080
Издатель
Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan