Central AsianResearch Index

Anti-corrosion coating to protect oil pipelines

The article examines the effective composition of the coating lubricant, which has enhanced performance properties. Tested coating composition, mass%: gossypol resin - 22; low molecular weight polyethylene – 61; mineral filler – organically modified layered silicates based on montmorillonite - 8; savylene – 9 provides anticorrosive protection of metals in the open air by forming a self-tightening coating and can be used for the operation of various equipment: conservation of oil production and refining equipment, protection of external surfaces of large machines, pipes, pumps, heat exchangers, etc. during downtime, storage and operation in the open, protection of other metal structures and equipment, in including in highly aggressive environments. The advantages of the new coating are that it provides anticorrosive protection of oil pipelines in an open aggressive atmosphere from 16 months (coating thickness 100-105 microns) to 70 months in light conditions (coating thickness 30-32 microns); the dielectric film protects the protected structure from electrochemical corrosion in contact with 23 hours 4 different metals; minimal surface preparation is required, which will be applied to a rusty and greasy surface; easily removed with alkaline cleaners, white spirit, or other solvents; It has a good ability to displace moisture from the protected surface; lubricants are thixotropic and self-tightening, are not subject to build-up and smudges; provides ultraviolet protection and long-term operation in the sun without cracking the anti-corrosion film.

Сведения

Журнал
Neft i gaz
Опубликовано
2025 · Т. 149, № 5, С. 23-31
Язык
Английский
ISSN
1562-2932 · 2708-0080
Издатель
Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan