Technology for improving low-temperature properties of diesel fuel based on hydrotreating and dewaxing processes
The article considers the scientific and technological foundations and features of industrial application of the diesel fuel hydrotreating process. The relevance of the study is explained by the increasing environmental requirements for diesel fuel due to the increase in the number of transport modes. The main goal is to obtain high-quality, stable and environmentally friendly diesel fuel by reducing the amount of sulfur-, nitrogen- and oxygen-containing compounds. The hydrotreating process is based on the catalytic method. Molybdenum-cobalt and molybdenumnickel systems embedded in highly porous aluminum oxide were used as catalysts. Diesel fractions with boiling limits of 164–351 °C were used as raw materials. As a result of studies conducted under conditions of high pressure and temperature in a hydrogen environment, it was found that up to 95% of sulfur compounds are eliminated in diesel fuel, and the sulfur content in the finished product does not exceed 10 ppm. The physicochemical properties of the resulting hydrogenate fully comply with the requirements of GOST R 55475-2013. Key indicators: freezing point -48 °C, density 784.5–800 kg/m³, flash point 30 °C, sulfur content < 10 ppm, content of mechanical impurities and water below the norm. This quality allows the fuel to be used in arctic conditions and ensures reliability and long service life of engines. In addition, hydrotreating is not limited to sulfur removal, but also improves the color, smell and stability of the fuel, increases the cetane number. This increases the wear resistance of diesel engines, reduces the formation of carbon residues and reduces the amount of harmful gases emitted into the environment. The results of the studies confirm the importance of hydrotreating technology for improving the quality of diesel fuel and obtaining products that meet international environmental standards.
Сведения
- Журнал
- Neft i gaz
- Опубликовано
- 2025 · Т. 148, № 4, С. 178-185
- Язык
- Английский
- ISSN
- 1562-2932 · 2708-0080
- Издатель
- Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan