Optimization of drilling fluid density to reduce damage and contamination of productive layers
This work considers maintaining the required density of drilling mud using weighting agents such as barium sulfate (BaSO4) as a key factor in ensuring wellbore stability and preventing complications during drilling. However, the introduction of barite into the drilling fluid can cause contamination of productive formations, reducing their permeability and productivity. Penetration of solid barite particles into the pore space leads to clogging of pores and filtration channels, which often becomes irreversible without specialized cleaning methods. To reduce the risk of contamination, it is necessary to optimize the composition of the drill-ing fluid and carefully control drilling parameters. The use of crystallization inhibitors, stabilizers, and polymer additives helps reduce barite sedimentation and decrease its adhesion to pore walls. This significantly lowers the likelihood of damage to productive intervals. In cases of existing contamination, restorative technologies are applied. Mechanical cleaning, including high-pressure well flushing, may be effective for surface-level clogging but has limited effectiveness for deep particle penetration. A more promising approach is the use of chelating agents capable of binding barium ions and breaking down barite deposits. The effectiveness of these reagents depends on the physical and chemical characteristics of the reservoir. An alternative solution involves specialized solvents designed for selective dissolution of barite in the pore space. Their application requires engineering justification and laboratory verifica-tion. A comprehensive approach, including optimization of the drilling fluid composition, control of technological parameters, and timely application of chemical reagents, helps maintain formation productivity and reduce operational costs during well drilling.
Сведения
- Журнал
- Neft i gaz
- Опубликовано
- 2025 · Т. 148, № 4, С. 49-62
- Язык
- Английский
- ISSN
- 1562-2932 · 2708-0080
- Издатель
- Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan