Central AsianResearch Index

THE HEAVY OIL EMULSIFCATION PROPERTY OF A SALT-TOLERANT POLYMER FLOODING AGENT

As a result of this research this study developed a salt-tolerant polymer for emulsifying heavy oil to overcome the limitations of traditional thermal recovery methods and explore the use of viscosityreducing polymers as a cold flooding technique for high-salinity heavy oil reservoirs. Interfacial tension experiments were conducted to screen polymers, while emulsification experiments were used to evaluate the viscosity reduction performance of heavy oil. The results showed that polymer P-5 exhibited the best performance, significantly reducing interfacial tension and enhancing emulsion stability. As polymer concentration increased, the water separation rate of emulsion decreased, and as salinity increased, the water separation rate also decreased. The optimal formulation was determined to be polymer P-5 at a concentration of 0.25% and a salinity of 55,000 mg/L, achieving the best viscosity reduction. Microscopic images of the emulsion further confirmed its good stability. These findings provide new insights and technical support for heavy oil recovery in Kazakhstan’s oilfields, guiding the application of salt-tolerant polymers in high-salinity reservoirs.

Сведения

Журнал
Neft i gaz
Опубликовано
2025 · С. 291-298
Язык
Английский
ISSN
1562-2932 · 2708-0080
Издатель
Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan