Central AsianResearch Index

CHEMICAL METHODS FOR ENHANCING OIL RECOVERY AT THE SOUTH ALIBEKMOLA FIELD

This article discusses the technology of applying chemical methods to improve the efficiency of oil production at the Yuzhnaya Alibekmola field. To overcome the difficulties encountered in the extraction of residual oil reserves, methods of using special polymers and surfactants are analyzed. The technology of chemical exposure is aimed at reducing the viscosity of the oil and improving the permeability of the layers. The study also evaluates the economic efficiency and environmental safety of the methods used. The results of the study showed that pumping polymer water increases the oil displacement coefficient by 15-20% and improves the permeability of the layer. Surfactants reduce the viscosity of oil and increase production volumes. In addition, the use of chemical methods can reduce production costs while complying with environmental safety measures. As a result of the introduction of chemical methods, the permeability of the reservoir was restored, which contributed to an increase in oil production. Pilot industrial studies conducted at the Yuzhnaya Alibekmola deposit have shown the effectiveness of processing clay acid, using a composition such as SNPH-9300 and complex acid treatment with a hydrophobic mixture. Chemical methods of oil production intensification are economically beneficial and contribute to an increase in production volumes in the long term. The introduction of these methods at the Yuzhnaya Alibekmola field will give an impetus to the innovative development of Kazakhstan in the oil and gas industry and will ensure the environmental safety of production. Further improvement of chemical methods and the introduction of new technologies, along with increasing the efficiency of oil production, create conditions for reducing the negative impact on the environment.

Сведения

Журнал
Neft i gaz
Опубликовано
2025 · С. 119-127
Язык
Английский
ISSN
1562-2932 · 2708-0080
Издатель
Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan