Central AsianResearch Index

Efficient hydraulic turbines for drilling wells: a study

Based on L. Euler's integral theory, which describes the interaction of an inclined downward fluid flow with a flat wall in a horizontal position, a structural scheme for hydro turbines for well drilling was developed. During the design process, inversion, composition, and universality methods were used, which are not typical for drilling equipment. The inversion method made it possible to transform the stator, which usually does not rotate in conventional downhole hydraulic motors, into a rotating component, while the rotor, on the contrary, was made stationary. This significantly simplified the design of the hydro turbines. Additionally, the principle of unidirectional flow in the supply grooves and the vector of the stator's rotational moment was implemented, allowing for the utilization of additional resources such as an increased moment arm length, the ejection effect, reactive outflow of the working fluid, and the generation of rotational moment on the external surface of the stator. Furthermore, from the perspective of universality, the stator, which is rigidly connected to the sliding bearing support and the lower part of the stator made of D16 aluminum, not only generates a rotational moment but also serves as a sliding bearing. Using a six-sector hydro turbine with a stator diameter of 196 mm as an example, calculations were performed for energy characteristics depending on the well depth, working fluid flow rate, and the angle of flow inclination to the horizontal. The technical and energy characteristics of the hydro turbines were presented in comparison with similar characteristics of serial hydraulic motors (turbodrills, screw motors). The results show that the fundamental design decisions in the formation of hydro turbines have led to a key outcome: while in serial hydraulic motors, energy costs increase with well depth, in hydro turbines, calculations do not show an increase in energy characteristics. In other words, the negative aspects typical of conventional downhole hydraulic motors are transformed into positive outcomes in hydro turbines.

Сведения

Журнал
Neft i gaz
Опубликовано
2025 · № 2, С. 74-90
Язык
Английский
ISSN
1562-2932 · 2708-0080
Издатель
Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan