Central AsianResearch Index

Evaluation of the efficiency of cyclic steam and water injection in the western section of the Karazhanbas field

This article discusses one of the main methods of increasing oil recovery in a heavy oil field, i.e. the thermal method of acting on formations by pumping a hot coolant. The method of thermal impact on the formation is both a promising method of increasing oil recovery and as almost the only way to extract high-viscosity oils and bitumen. The use of thermal methods of steam and water injection into the reservoir contributes to the growth of oil deposits exploitation and reduction of hydraulic energy losses during filtration in the bottom-hole zone of the reservoir, which is currently used at the field. The use of traditional technologies in the extraction of high-viscosity oils and natural bitumen leads to low extraction and loss of valuable accompanying fluid components, which significantly reduces the profitability of development and harms the environment. In this regard, it is necessary to develop a scientifically sound approach to the development of deposits of high-viscosity oils and natural bitumen, which would take into account their specifics and the optimal mode of operation of wells in the production of high-viscosity oil.

Сведения

Журнал
Neft i gaz
Опубликовано
2024 · Т. 143, № 5, С. 58-68
Язык
Английский
ISSN
1562-2932 · 2708-0080
Издатель
Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan