Central AsianResearch Index

MODERN DESIGNS OF DIAMOND DRILLING TOOLS FOR WELL DRILLING

СОВРЕМЕННЫЕ КОНСТРУКЦИИ АЛМАЗНЫХ КОРОНОК ДЛЯ БУРЕНИЯ СКВАЖИН

The article presents the results of research on the creation of drill bits with high durability and sufficient productivity when drilling hard rocks. Four areas of research have been identified to solve this problem: the crown must be multilayer, the profile of the diamond-bearing layers must represent annular conical protrusions and cavities; diamond layers should be separated by diamond-free layers of lower hardness and experience uniform specific pressure during operation; the design of the bit should take into account the peculiarities of the rock destruction mechanism under the action of diamond grains; the manufacturing technology of the crown matrix must be perfect. Only defect-free diamonds obtained by sorting with special methods are involved in the creation of the matrix; Adding CrB2 or VN nanopowders to the composition of the charge makes it possible to improve the quality of the matrix structure, all tribiological and operational properties, and due to the preliminary metallization of high-strength synthetic diamonds, a transition zone “diamond-coating-matrix material” is created, which will significantly increase the wear resistance of diamond rock cutting tools. The mentioned problems have been partially solved: a multilayer impregnated bit with a ridged profile of diamond-bearing layers and a uniform specific pressure on the latter during drilling has been created and put into production, laboratory studies have been carried out to improve the quality of composite materials with positive results, further research is being carried out in all other areas.

Сведения

Журнал
Neft i gaz
Опубликовано
2022 · № 2, С. 92-102
Язык
Английский
ISSN
1562-2932 · 2708-0080
Издатель
Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan