ANNEALING TEMPERATURE-DRIVEN ORDERING AND STRUCTURAL EVOLUTION OF FePt NANOPARTICLES TOWARD THE L10 PHASE
The annealing temperature influence on the structural evolution of FePt nanoparticles synthesized by the pulsed plasma in liquid (PPL) method was systematically investigated. FePt nanoparticles were prepared using FePt alloy electrodes in ethanol and subsequently annealed at 300, 400, and 600 °C. The as-synthesized nanoparticles exhibited a chemically disordered face-centered cubic (A1) structure. Annealing at 300 °C produced negligible structural changes, whereas treatment at 400 °C induced a pronounced transformation to the chemically ordered face-centered tetragonal (L1₀) phase, confirmed by the appearance of characteristic superlattice reflections and peak splitting in the XRD patterns. Further annealing at 600 °C resulted in only minor structural modifications, indicating that chemical ordering was nearly complete at 400 °C. HRTEM images revealed nearly spherical nanoparticles with sizes of approximately 5–8 nm and well-defined lattice fringes after annealing at 400 °C. The results identify 400 °C as the optimum annealing temperature for obtaining highly ordered L1₀-FePt nanoparticles synthesized by the PPL method.
Сведения
- Опубликовано
- 2026 · Т. 614, № 1005, С. 735-742
- Язык
- Английский
- ISSN
- 1694-7851 · 1694-8505
- Издатель
- Kyrgyz State University named after I. Arabaev
- Аффилиации
- The National Academy of Sciences of the Kyrgyz Republic
I.K. Akhunbaev Kyrgyz State Medical Academy
Institute of Modern information technologies in Education