SYNTHESIS OF COMPOSITES OF THE Fe-Cu SYSTEM BY THE METHOD OF ELECTROSPARK DISPERSION
Using X-ray phase analysis, it was established that the compositions of Fe-Cu system composites obtained by electric spark dispersion depend on the nature of the liquid medium. In hexane, a composite is formed, consisting of two components: a solid solution of the γ-modification of iron in copper, i.e. Cu(γ-Fe) and α-modifications of iron (α-Fe). The composite obtained in ethyl alcohol consists of solid solutions based on copper Cu(γ-Fe) and iron-based α-Fe(Cu) with an fcc and bcc structure, respectively, as well as Fe3O4 oxide. The composite obtained in ethyl alcohol consists of solid solutions based on copper Cu(γ-Fe) and iron-based α-Fe(Cu) with an fcc and bcc structure, respectively, as well as Fe3O4 oxide. Solid solutions Cu(γ-Fe) and α-Fe(Cu) are substitutional solid solutions. The composite obtained in water, in addition to solid solutions based on copper and iron, also contains oxides Fe3O4 and CuO. The value of the lattice parameter of the Cu(γ-Fe) hard alloy depends on the numerical ratio of metals in the hard alloy. The higher the iron content in the Cu(γFe) hard alloy, the higher the lattice parameter of the hard alloy is than the lattice parameter of copper.
Сведения
- Опубликовано
- 2025 · Т. 10-895, № 2/2, С. 101-107
- Язык
- Английский
- ISSN
- 1694-7851 · 1694-8505
- Издатель
- Kyrgyz State University named after I. Arabaev
- Аффилиации
- Kyrgyz state university named after I. Arabaev