DESIGN AND DEVELOPMENT OF AN AUTONOMOUS ROBOT PROTOTYPE FOR A POTATO FARM
This article includes the design and development of an autonomous robotic system for intelligent navigation in a potato farm. An algorithm for stable and accurate navigation using ultrasonic sensors was designed and implemented in a laboratory-scale model. Hence, four ultrasonic sensors and an Arduino-based control system were a solution for the suggested robot to the farm’s physical condition. The suggested robot was first developed with a structure that reflects the physical attributes of the farm, including four ultrasonic sensors and an Arduino-based control system. The robot was further simulated in the MATLAB/Simulink environment and ultimately modeled and evaluated under three different physical conditions. For the given scale of the robot, the maximum acceptable deviation is set at 2 cm, whereas in the unstable scenario, the deviation reaches 5 cm. Experiments were conducted with the primary goal of reducing tracking errors and oscillations while maintaining the robot’s alignment with the optimal route. In addition, the mechanical component is constructed with a design that corresponds to the actual prototype in terms of structure and operation. Thus, consistency between the model and the physical system is maintained. Moreover, ultrasonic sensors are used instead of LiDAR sensors under the same arrangement of ridges in potato farms. This decision is logical and economical. Consequently, cost efficiency is improved in future agricultural applications
Сведения
- Опубликовано
- 2025 · Т. 13, № 4, С. 93-109
- Язык
- Английский
- Цитирований
- 2
- ISSN
- 2306-6172 · 2308-9822
- Издатель
- L. N. Gumilyov Eurasian National University