Central AsianResearch Index

SEQUENTIAL ELECTROCHEMICAL PROCESSES FOR THE TREATMENT OF MAGNESIUM LEACHING SOLUTIONS

Processing anthropogenic wastes from the asbestos industry to recover magnesium oxide is a relevant task that simultaneously addresses environmental and economic challenges. Nitric-acid leaching is a promising approach; however, its industrial implementation is constrained by the complexity of purifying the resulting solutions. In this study, an integrated hydrometallurgical flowsheet was developed and investigated, sequentially combining electrochemical oxidation of Fe(II), electrochemical precipitation of impurities, and electrodialytic concentration of the target magnesium nitrate solution. Electrochemical oxidation enabled Fe(II) to Fe(III) conversion exceeding 98%. Kinetic analysis revealed a shift in the rate-controlling step: at T < 40°C, the process is kinetically controlled (Eₐ = 94.8 kJ/mol, reaction order n = 1.34), whereas at T > 40°C it transitions to the diffusion-controlled regime (Eₐ = 17.9 kJ/mol, n = 0.40). The combined neutralization method mitigated precipitant passivation and removed >99% of impurities at a specific energy consumption of 38.1 kWh/m³. Analysis of variance showed that process time is the dominant factor. Electrodialytic concentration of the purified magnesium nitrate solution demonstrated an almost sixfold reduction in energy demand compared with thermal evaporation (52.6 kWh/m³ vs 313.8 kWh/m³), achieving a current efficiency of 95.6%. The proposed reagent-free scheme is a technically feasible and energy-efficient technology for processing serpentinite wastes within the circular economy concept.

Сведения

Опубликовано
2026 · Т. 466, № 1
Язык
Английский
ISSN
2224-5286 · 2518-1491
Издатель
Central Asian Academic Research Center LLP