NUMERICAL SIMULATION OF THERMOHYDRODYNAMICS DURING HEATED WATER DISCHARGE INTO LAKE BALKHASH
This paper presents a numerical study of thermal pollution from a potential discharge of heated water from a nuclear power plant cooling system into the coastal zone of Lake Balkhash. The aim of the study was to determine the dynamics of the formation and spatial propagation of the thermal footprint, as well as to assess its impact on the hydrodynamic characteristics of the water area. A two-dimensional computational fluid dynamic (CFD) model based on the Navier-Stokes and energy equations, supplemented by a k-ω SST turbulence model, was used for the simulation. The simulation was conducted by using real shoreline geometry. The model was validated using a test jet injection problem, which demonstrated good agreement with experimental data. Modeling results showed that within the first hour after the discharge begins, a stable zone of thermal pollution, approximately 1.5 km² in area, forms, where the water temperature exceeds background values by 0.5–1.0 K. The high-temperature plume gradually transforms into a diffuse heat spot, which persists in the coastal zone due to weak water exchange and recirculation. Analysis of the velocity field revealed zones of local circulation that facilitate long-term heat retention. The scientific novelty of this study lies in the application of a CFD approach to assessing the thermohydrodynamics of the discharge under conditions of limited water exchange in a large lake with the actual morphology of the shoreline of Lake Balkhash. The practical significance lies in the potential use of the developed method for predicting environmental risks and optimizing the cooling systems of nuclear and thermal power plants located near the lake.
Сведения
- Опубликовано
- 2025 · № 4
- Язык
- Английский
- ISSN
- 1991-346X · 2518-1726
- Издатель
- Central Asian Academic Research Center LLP