Central Asian Research Index

Bulletin of the Karaganda university - Physics, 2020, т. 98, № 2, с. 75-82

Research of annealing influence on the hardness of detonation coatings from zirconium dioxide

B.К. Rakhadilov, D.N. Kakimzhanov, N. Kantai, P. Kowalewski, R.S. Kozhanova

Аннотация · Abstract

The article studied the effect of annealing on the structure and properties of zirconium dioxide coatings obtained by detonation spraying. Detonation spraying was realized on a computerized detonation spraying complex of the new generation CCDS2000. Thermal annealing of coated samples was performed at temperatures of 900 °C, 1000 °C, and 1100 °C. It was determined that the microhardness of zirconium dioxide coatings increases by 10–25 % depending on the annealing temperature after annealing. The results of nanoindentation showed that the nanohardness of the coatings after annealing at 1000 °C increases by 50 %. It was determined that after annealing at 1000 °C, the elastic modulus of the coatings increases, which indicates a decrease in plasticity and an increase in the strength of the coatings.. X-ray diffraction analysis showed that the phase composition of coatings before and after annealing consists of t-ZrO2. After annealing occurs there is an increase in the degree of t-ZrO2 tetragonality. Electron microscopic analysis showed that an increase in the number and size of micro-continuity in the form of thin layers after annealing. Determined that increase the hardness of zirconium dioxide after annealing at 900–1100 °C is associated with a higher degree of tetragonality t-ZrO2 phase.

Сведения · Details

Профили авторов · Author profiles