Central Asian Research Index

Journal of Mathematics Mechanics and Computer Science, 2026, т. 130, № 2, с. 122-136

MODELING OF MAGNETIC ABRASIVE FINISHING OF BRASS ALLOY BASED ON FUZZY LOGIC APPROACH

Mahmmoud Abdallha, Salah S. Abed Alkareem, Ali H. Kadhum, Asmaa Jamal Awad, Salah Al-Zubaidi, Oday Abdullah, Mohd Shukor Salleh, Munaf S. Majeed

Department of Automated Manufacturing Engineering, Al-Khwarizmi College of Engineering, University of Baghdad, Baghdad, Iraq
College of Technical Engineering, Al-Farahidi University, Baghdad, Iraq
College of Engineering, Al-Naji University, Baghdad, Iraq; Department of Energy Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq
Fakulti Teknologi Dan Kejuruteraan Industri Dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Melaka, Malaysia
AL-Nahrain Renewable Energy Research Center, Al-Nahrain University, Baghdad, Iraq; Department of Radiology Techniques, Dijlah University College, Baghdad, Iraq

Аннотация · Abstract

Magnetic abrasive finishing (MAF) is a non-classical finishing in which a super-finished surface is produced. This study aims to develop a fuzzy logic (FL) model for predicting the CuZn28 surface roughness produced by a new pole geometry MAF process. The experimental work was done before, and its data were recalled here to develop the FL model. Pole geometry, rotational speed, MAFtime, and applied current were used with three levels that generated nine experimental runs based on the L9 Taguchi experimental scheme. Four membership functions were applied, and the developed FL model reached 87% prediction accuracy. The degree of change in each membership function reflects the significance rank of parameters, which were speed, current, time, and pole geometry.

Сведения · Details