Eurasian Chemico-Technological Journal, 2011, т. 13, № 1-2, с. 49-57
Effect of Carbon Fiber Addition on Ceramic Reinforced Phenolic Resin Based Friction Composites
Аннотация · Abstract
Carbon fibers have been used as additional reinforcing fibers to improve the mechanical and tribologicalproperties of phenolic resin-based ceramic-carbon composites. The composites comprising ceramicparticulates such as Silicon carbide, Boron carbide of 1-30 micron size as reinforcement and phenolic resinas matrix carbon precursor were prepared by compaction method followed by carbonization to 1000 °Cin inert atmosphere. Experimental results indicate that carbonization results in decrease in thickness andweight, the amount of reduction increasing with addition of carbon fibers results in compact high densitycomposites. Composites comprising of 10 wt. % fibers exhibited maximum hardness, compressive strengthand density after carbonization. Tribological properties of the composites were evaluated against Cr6 ballusing a pin-on-disc Tribometer with different linear speed, sliding distance and load conditions. It was foundthat the composites filled with lower amount of carbon fibers showed relatively higher friction coefficientvalue. Also, it was noted that friction coefficient increases with increase in the applied load (1N, 2N and 5N)and linear speed.
Сведения · Details
- DOI 10.18321/ectj65
- Журнал · Journal Eurasian Chemico-Technological Journal
- Язык · Language английский
- Цитирования (Crossref) · Citations 0