Eurasian Chemico-Technological Journal, 2011, т. 13, № 1-2, с. 35-40
Effect of Additional Particulate Reinforcement on the Properties of Fibrous Ceramic Matrix Composites
Аннотация · Abstract
Composites, generally, consist of two phase i.e. matrix and reinforcement. Here in this work additionalphase in terms of micro/nano particles was added in the fiber reinforced ceramic matrix composites andits effect on the final properties of composites was studied. Composites were prepared using sol derivedfrom Tetraethoxysilane (TEOS) and Dimethyldiethoxysilane (DEDMS), and polycarbosilane (PCS) asmatrix precursors and SiC fabric as reinforcement. To some composites another phase of solid, micro/nanopowder precursor of SiC was added to decrease number of impregnation cycles. Latter composites resultedin higher density. Green composites were post-cured and pyrolyzed. Some of the composites were heatedto 1500 °C in argon atmosphere. Composites were characterized for density, microstructure and mechanicalproperties. It revealed that the resulting matrix was solid glass and addition of SiC powder facilitated therapid densification. Composites prepared with SiC nanoparticles as well as SiC fabric as reinforcementexhibit higher flexural strength than those made without nanoparticles. The fracture behaviour is also seento be of mixed mode failure type.
Сведения · Details
- DOI 10.18321/ectj63
- Журнал · Journal Eurasian Chemico-Technological Journal
- Язык · Language английский
- Цитирования (Crossref) · Citations 0